> >>1,75mm - StoneFil™ - Terracotta - filament FormFutura - 0,5kg
1,75mm - StoneFil™ - Terracotta - filament FormFutura - 0,5kg View larger
Previous Next

1,75mm - StoneFil™ - Terracotta - filament FormFutura - 0,5kg

New product

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.
This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.

More details

7 Items

By buying this product you can collect up to 3 loyalty points. Your cart will total 3 loyalty points that can be converted into a voucher of 0,30 €.


32,95 € tax incl.

Add to wishlist

Free Google QRcode module from Mediacom87

Data sheet

Hmotnosť materiálu0,5 kg
TransparentnosťNepriehľadný
Priemer vlákna1,75 mm
Tolerancia priemeru± 0.05 mm
Odporúčaná teplota pre 3D tlač215°C - 240°C
Odporúčaná rýchlosť 3D tlačeporovnatelné s PLA (40 - 80 mm/s)
Hmotnosť balenia800 g

More info

Unique features

  • Easy to print

  • 50% gravimetric powdered stone filling

    • ±37% heavier than “normal” PLA

  • Matte and rough stone-like finish

  • Unique natural/organic gradient colour linings

    • Every print has its unique natural stone gradient colour shading

General printing guidelines *

Nozzle size: ≥ 0.4mmLayer height: ≥ 0.12mmFlow rate: ± 110%
Print temp: ± 200 - 240° CPrint speed: High / MediumRetraction: Yes ± 5mm
Heat bed: ± 0 - 60° CFan speed: 50-100%Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Abrasiveness

StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.

Reviews

No customer reviews for the moment.

Write a review

1,75mm - StoneFil™ - Terracotta - filament FormFutura - 0,5kg

1,75mm - StoneFil™ - Terracotta - filament FormFutura - 0,5kg

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.
This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.

7 other products in the same category:

Customers who bought this product also bought: